00 ± 387.53, which were not significantly different (p > 0.05) from those of groups B (B1 = 993.20 ± 327.19, B2 = 1471.00 ± 311.68, B3 = 1408.40 ± 295.07), or group PD98059 molecular weight C (C1 = 1326.80 ± 785.30, C2 = 1322.20 ± 285.33, C3 = 1348.40 ± 527.21). SEM images of the fractured crowns showed that the origin of the fracture appeared to be located at the occlusal surfaces of the crowns, and the crack propagation tended to extend from the occlusal

surface towards the gingival margin. Conclusions: Implant abutment angulations of 0°, 15°, and 30° did not significantly (p > 0.05) influence the fracture resistance of overlaying Ceramage single crowns constructed with or without reinforcing fibers. The two types of fibers used for reinforcement (Connect and Interlig) had no effect (p > 0.05) on the fracture resistance of overlaying Ceramage single crowns. SCH772984 purchase “
“Purpose: To evaluate the effect of three commonly used bond primers on the bending strength of glass fibers and their bond strength to maxillofacial silicone elastomer after 360 hours of accelerated daylight aging. Materials and Methods: Eighty specimens were fabricated by embedding resin-impregnated

fiber bundles (1.5-mm diameter, 20-mm long) into maxillofacial silicone elastomer M511 (Cosmesil). Twenty fiber bundles served as control and did not receive surface treatment with primers, whereas the remaining 60 fibers were treated with three primers (n = 20): G611 (Principality Medical), A-304 (Factor II), and A-330-Gold (Factor II). Forty specimens were dry stored at HAS1 room temperature (23 ± 1°C) for 24 hours, and the remaining specimens were aged using an environmental chamber under accelerated exposure to artificial daylight for 360 hours. The aging cycle

included continuous exposure to quartz-filtered visible daylight (irradiance 760 W/m2) under an alternating weathering cycle (wet for 18 minutes, dry for 102 minutes). Pull-out tests were performed to evaluate bond strength between fiber bundles and silicone using a universal testing machine at 1 mm/min crosshead speed. A 3-point bending test was performed to evaluate the bending strength of the fiber bundles. One-way Analysis of Variance (ANOVA), Bonferroni post hoc test, and an independent t-test were carried out to detect statistical significances (p < 0.05). Results: Mean (SD) values of maximum pull-out forces (N) before aging for groups: no primer, G611, A-304, A-330-G were: 13.63 (7.45), 20.44 (2.99), 22.06 (6.69), and 57.91 (10.15), respectively. All primers increased bond strength in comparison to control specimens (p < 0.05). Primer A-330-G showed the greatest increase among all primers (p < 0.05); however, bonding degraded after aging (p < 0.05), and pull-out forces were 13.58 (2.61), 6.17 (2.89), 6.95 (2.61), and 11.72 (3.03). Maximum bending strengths of fiber bundles at baseline increased after treatment with primers and light aging in comparison with control specimens (p < 0.05), and were in the range of 917.72 to 1095.25 and 1124.